Lampes UV - Applications
Products
ACCESSORIES 

As a complement to our products, we also supply the accessories which insure the functioning the germicidal treatment systems, a selection of materials which answers the highest requirements regarding safety.

CONNECTORS
Lamps Connectors
Plastic Connector is for the UV tubes of the series T5 (Ø 15 mm), supporting until 1A max. 
The plastic is resistant to UV. 

Ceramic Connector was realized for supplying UV tubes T6 (Ø 19 mm) the current of which in the tube is upper to 1A. 

CLIPS 
Fixation clips of tubes on equipments

Tubes are maintained by clips allowing easy maintenance.  
Placed up at the end of every tube this clip insures right fixation of tubes. 

 Models :
CLIP-IT36 for the serial lamps T5, Standard and HO Lamps
CLIP-IT37 for the serial lamps T6, Amalgam Lamps

CAP
Connections Protection Cap
STA4 CONNECTOR

4 pins Male / Female + Armor plating + Lock on cable PG11


Studied and adapted for the use with the power cables of lamps.  
Facilitate the maintenance of machines 


SAFETY GLASSES
Eyes Protection
In compliance to the standard
EN170 (2C - 1.2)  
Filters Ultraviolet Rays  

SAFETY GLASSES
Eyes Protection
In compliance to the standard
EN170 (2C - 1.2)  
Filters Ultraviolet Rays  

SAFETY GLASSES
Eyes Protection
In compliance to the standard
EN170 (2C - 1.2)  
Filters Ultraviolet Rays  




HIGH FREQUENCY ELECTRONIC BALLASTS
HF electronic ballasts allow the optimization of UVC lamps and extend their lifetime. 
Every type of ballast allows electric supplying one or two lamps and it corresponds to a certain range of power. 
These devices check proper functioning of lamps. The information can be then treated in the automatism of the germicide treatment. 


CONTROL MODULE
For certain model of ballasts, we have developed a running control module. This opto-coupled module allows handling the LED to feed an automatism relay. 
 

UV MONITOR PRO 5

UVC radiation control


Works with UV sensor, supplies a relay contact and a radiation levels LED

ASSEMBLED CABLE
 (3m - 4m - 5m) 
- AWG20 Cable  + Plastic Connector + Cap
- AWG18 Cable  + Ceramic Connector + Cap